Slade Dean
Member
Does anybody know if this would be a simple bolt in swap???It looks like it should up.Any help would be appreciated.
Rear bumper swap 74' to a 73'???
- Thread starter Slade Dean
- Start date
-
Burntorange70
Well-Known Member
It may or may not. Could depend on if you have the shock type bumper mounts or the more standerd kind.
But if it does not just bolt up then all you should have to do in bolt the mounts to the bumper then hold/brace it up there where it goes on the back of the car then mark the bolt location on the back of the car using the bumper mounts as a guide. Drill them out and mount the bumper up using bolts with nuts on the back.
But if it does not just bolt up then all you should have to do in bolt the mounts to the bumper then hold/brace it up there where it goes on the back of the car then mark the bolt location on the back of the car using the bumper mounts as a guide. Drill them out and mount the bumper up using bolts with nuts on the back.
I assume you are talking about swingers? if so no. http://www.forabodiesonly.com/mopar/showthread.php?t=74138
Burntorange70
Well-Known Member
O I just assumed he was talking about a Duster. It can be done on a Swinger but it aint EZ.
Time to get them both out on the floor. Compare bumper shape, size, bumper guards (if used), and mounting bolt locations. Then compare mounting brackets (or shocks), facebars (or lack of), and rear body panels of the two cars. Should tell you everything you need to know. Then you can tell all of us.
-
