Rear ends

-
rusty

rusty

Well-Known Member
Joined
May 13, 2011
Messages
238
Reaction score
3
Location
Desoto,Ks
How many different rear ends did they use in a-bodies
 
Chrysler used three rearends; 7 1/4, 8 1/4 and 8 3/4. The 7 1/4 was probably the most common, found in pretty much all 6 cyl. cars and in the regular V8 cars. The 65 and some 66 high performance cars still used the 7 1/4 because the 8 3/4 was not available yet. 8 1/4 Was 73-76 with the large bolt pattern. The 8 3/4 was available 66-72 in small bolt pattern only. It came behind any engine, depending on the options ordered. I left out the Dana 60 because it was only used in the 68 Super Stock Barracuda and Dart. It was actually a B-body axle made to fit by Hurst.
 
Ok thanks just wasn't sure,I am looking for an 8.75 local.
 
Come on guys is it to early in the morning, he asked how many """different""" rears are out there so 7 1/4, 8 1/4 and THREE DIFFERENT 8 3/4's. They got different internals right so they're different, come on work with me.:book::shock:
 
demon seed said:
Come on guys is it to early in the morning, he asked how many """different""" rears are out there so 7 1/4, 8 1/4 and THREE DIFFERENT 8 3/4's. They got different internals right so they're different, come on work with me.:book::shock:
Click to expand...

x how many ratios?
 
You must log in or register to reply here.
-

Back
Top