refreshing an 833 hurst 4 speed trans

-
T

tarpit

Member
Joined
Jun 11, 2007
Messages
17
Reaction score
0
Location
florida
Any body know what to do or how to do it as far as how to freshn up an old 69 4 speed hurst.
Im doing a complete resto mod on my 69 cuda and figure the trans should get a face lift as well.
Any suggestions out thier? seems sloppy and loose when shifting and definetly has seen its abuse.
Thanks, Machine head Dan
 
I rebuilt my four speed a couple of years back. It was actually fairly easy. Get a good set of snap ring pliers as there are a couple of them that a quite large. The normal size snap ring pliers you get at sears are not big enough. Brewers Performance has all the stuff you need.
Rod
 
Your best bet is to do a complete teardown. Brewers or Passon Performance has all the stuff ya need for the rebuild.

Teardown1.jpg
 
BTW, it's not a Hurst transmission, some of them did come from the factory with Hurst shifters though. I believe they were made by New Process for Mopar.
 
pntastar, what wheels ru running. i've 68 Gts in same colour & am looking at new wheels to replace dog dishes.
 
You must log in or register to reply here.
-

Back
Top