sanding blocks

[scampmehard]

well i dont like dura block at all and i was looking at asf block and i took a jab at making my own...

I took aluminum I beams 3X2.5X0.15 and ripped them down the middle and mil the surface to make sure it was true and flat. Then I took some 1/8 in EVA foam for backing glued it to the I beam for adhering the sand paper to the block.. for $90 bucks I got a 4", 6", 8", 2 12", 2 16" , 24", 36", 48" blocks the 36" and the 48" block seems to be working really well for the long panels on my a body..

 

[daredevil]

:worthles:

 

[scampmehard]

YOUR POINT TAKEN IM WORKING ON THAT I SEEM TO LOST MY CAMERA EEERRRKops::wack::idea1:

:worthles:

 

[megajoltman]

 

[CUUDAK]

Dura-blocks are the best imo.... You have to get the good ones though.

Thats what I used on all my prep work as well as bodywork! My Ram was arrow straight!
I also use 5 gallon stir sticks for final sanding!