[WANTED] SB 727 inspection cover

-
Status
Not open for further replies.
daves66valiant

daves66valiant

68 Dart 340/727:66 Signet Vert 340/5spd: 68 D100
Joined
Nov 24, 2005
Messages
3,151
Reaction score
1,072
Location
SoCal
Rating - 100%
2   0   0
Contact seller
looking for SB 727 inspection cover.

Also need transmission bell to engine bolts.

And the engine to transmission support brackets
 
Galvanized inspection cover for 727 $20 plus the ride
 
Dave just so you know, there are different length engine to trans brackets for the drivers side (all pass side are the same). The 75 and newer brackets on a 360 are shorter on the drivers side than the older ones. Not sure on 318's. If your needing them for a 360 let me know the year and I'll look
 
fishy68 said:
Dave just so you know, there are different length engine to trans brackets for the drivers side (all pass side are the same). The 75 and newer brackets on a 360 are shorter on the drivers side than the older ones. Not sure on 318's. If your needing them for a 360 let me know the year and I'll look
Click to expand...
Thanks Fishy. It’s for a 68 date code 340. Not sure about the year of the 727 though.
 
I ended up finding the whole setup on eBay. Hopefully the drivers side is correct.
 
gregpurcell said:
My trans cover as stated above is a bit damaged. I have the correct 727 brace brackets from a 67 318/727.
Click to expand...
Thx Greg. I found everything I needed including all the nuts and bolts. Got lucky on Ebag.
 
Status
Not open for further replies.
-

Back
Top