[WANTED] seat belts 70 duster for front buckets.

[smokindust]

need the 2 outer belts that bolt to the rocker panel. need black but will take any color at this point. no rust on the buckels thanks mark. they are about 22.5 inches long

 

[1970-dart]

need the 2 outer belts that bolt to the rocker panel. need black but will take any color at this point. no rust on the buckels thanks mark. they are about 22.5 inches long

not sure if they are the same but i have a full set ( black)for sale out of a 74 swinger

 

[smokindust]

thanks but im 99% sure they are different. I have a 72 duster and they are not the same.

 

[EL5DEMON340]

71 had short retractor type or non retractors with about 12" of the plastic covers and around 10 12" of belt sticking out. I've got some pics somewhere. Not sure what's correct for 70 but I would think the non retractor flavor.

 

[dogbreath]

Should be 2 belts that bolt to the hump. 1 for the lap belt and 1 for the shoulder belt .

 

[EL5DEMON340]

Rocker panel side will have one for your lap and over the window for chest.

 

[dogbreath]

OK that's the one in the plastic sleeve.

 

[smokindust]

Yes those are the 2 I need. Pics from my phone wont upload.they are not the retractable ones.

 

[EL5DEMON340]

i think this type is what is needed.

 

[EL5DEMON340]

You can take a the rear side ones and cut down the plastic and its basically the same if my memory is correct.

 

[EL5DEMON340]

here is the retractor type in my 71.

 

[smokindust]

You can take a the rear side ones and cut down the plastic and its basically the same if my memory is correct.

Thats not a bad idea but I think they are alot shorter. Im going to check that out.