shorter clutch fan

[cudaman51]

i remember hearing about a mercaites Benz clutch fan that is a little shorter then the mopar one. intended use is a body small block. anybody know the part number, i would appreciat it thanks

 

[smlveightis]

Check out Haden part# 2705. approx. 3-5/8" long.

 

[cudaman51]

thanks again

 

[cudaman51]

just checked and the 2705 one is stock mopar length. there is still a shorter thermel one out their.that one is to long for my car.

 

[65BCODA]

Try the hayden #2765 - This is the one I used on my car....'65 Cuda

Installed with a 3 core U.S. Radiator Optima core...Aluminum March Performance pully.
Was a bit tight but took the pully and clutch to machine shop and had 1/8" milled from face of pully & 1/8" milled off leading edges of clutch heat sinks.
Now have 5/8" rad to clutch.

 

[autoxcuda]

Try the hayden #2765 - This is the one I used on my car....'65 Cuda

....QUOTE]

I agree.

hayden #2765 - 2 3/4" overall ... 1990 Jag XJ6

 

[cudaman51]

that will work thanks

 

[805moparkid]

Try the hayden #2765 - This is the one I used on my car....'65 Cuda

....QUOTE]

I agree.

hayden #2765 - 2 3/4" overall ... 1990 Jag XJ6

my boss uses a thermal that i believe is 2.5" deep... i'll have to ask and get the number to be sure monday...

 

[Johnny Dart]

Like Steve said, the shortest one people are using is for the Jag.
Got one on my car, cant remember the #.
Be preparred to plays some serious finger hockey bolting that thing in.

 

[65BCODA]

Be preparred to plays some serious finger hockey bolting that thing in.

Very true......I had to get a friend with lady fingers to get in there.

 

[cudaman51]

got the hayden 2765. sumit had it in stock. works grate. thanks guys