Small Ball Joint Upper Control Arm Needed

[heyitruns]

Had a complete failure of the upper ball joint on the driver's side. Upper control arm and spindle assembly ruined. I know people are ripping these out left and right for the bigger sized ones that'll hold discs. if you have them sitting around, I could sure use them.

 

[lhearold]

PM me, I have the UCAs.

Larry

 

[norman]

i have some spindles for 9inch brakes i also have many control arms. let me know if you need it.

 

[George R]

I have small bolt pattern disc brake parts. Upper and lower control arms, spindles, calipers, master cylinder, proportioning valve, etc. PM if needed.

George

 

[norman]

I have the upper control arm and spindle. 30.00 plus shipping.I am in florida,northeast.if you want it let me know,norman

 

[waggin]

we need to know if it is 10" or 9" drums or kh 4 piston to determine which spindle you need.......yep they are all diffrent

 

[2 Darts]

I have a complete 72 /6 drum brake front end assembly and K-frame. Dirty but straight. Will trade for 73 & > front sway bar assembly, or make offer. Pickup only (you'll need a pickup to pickup). Located in Dallas, TX.