[WANTED] small block V8 OD bellhousing 130 tooth

[junkyardhero]

like the title says. looking for a small block V8 OD bell to convert over a 65 dart so i needs the 130 toofs variant.

would also be interested in a cheap standard bell that i could machine out the center.

shipping to 91505 or if you're within striking distance i'll drive to you and lay cold hard cash down.

 

[Budgetmoparman]

like the title says. looking for a small block V8 OD bell to convert over a 65 dart so i needs the 130 toofs variant.

would also be interested in a cheap standard bell that i could machine out the center.

shipping to 91505 or if you're within striking distance i'll drive to you and lay cold hard cash down.

I have a couple small block od bell housings. How do I tell if they are 130 tooth?

 

[junkyardhero]

I have a couple small block od bell housings. How do I tell if they are 130 tooth?

the casting #

4202507 (is for truck)
3743859 (A/F & truck)

 

[YY1]

FYI there are also some with no casting number.

Every one of these I have seen has an odd casting mark that looks kind of like a zipper running diagonally on one side of the top. Almost looks like a defect.

They also have a series of boxes that look like where a casting number should be but all the boxes are blank.

 

[junkyardhero]

FYI there are also some with no casting number.

Every one of these I have seen has an odd casting mark that looks kind of like a zipper running diagonally on one side of the top. Almost looks like a defect.

They also have a series of boxes that look like where a casting number should be but all the boxes are blank.

thanks man, i didn't know that. if i have seen one out in the wild i probably didn't notice.