smallblock stuff

-
Status
Not open for further replies.
7

71dmn

cvillarreal
Joined
Jun 14, 2006
Messages
13
Reaction score
0
Location
san antonio,tx
Rating - 0%
0   0   0
Contact seller
i'm looking for a ten inch converter (3000-3800) for a 904.needs to be a known brand such as transking,tci,b&m,hughes,dynamic,coan...etc. not the local tranny warehouse junk...they do not work properly...i've trialed n errored thes types already.also a holley strip dominator intake or an m1.lets just keep it simple.no need to ask me what im building or diagnose my combos.i know what im looking for.not trying to sound rude.jus tired of the know it alls.oh yeah this is a request for used stuff that still works.so if you're asking for a price thats only a couple of bucks lower than retail dont waste my time or yours.thx n have a nice day!
 
I have a 9 1/2 dynamic 4500 stall.On the footbrake it stalled to 2800rpm and flashed to around 4500.went 6.90 ets with a mild 340.I'll take $250 plus shipping.
 
sounds like a good price to me.its does sound a little loose for my 318...let me ask around and i'll get right back to you.unless you can give some insight.the car weighs 3300 with me in it.3.91's full spool,j-heads 2.02/1.60 valves,adj. rockers,508 purple shaft,weiand intake,sub frames,comp drag shock all around,adj. pinion snubber,superstock springs,mopar tach drive distributor,moroso underdrive crank pulley,750 dbl pumper,reverse manual valve body. the car runs 13.80's all motor and 12 teens on 100 shot of the dope.it should run a little better.i think its the overated cheap 10 inch 3800 converter i have.
 
Status
Not open for further replies.
-

Back
Top