Spark plug wire routing for a 340 small block.

-
SKR8PN

SKR8PN

Well-Known Member
Joined
Aug 10, 2021
Messages
74
Reaction score
44
Location
Mansfield Ohio
Lets see how everyone has handled their plug wires. Routing, looms, etc. I want to use 90 degree boots on the distributor ends, and route the wires more behind the heads to clean things up. To me, the straight terminals on the distributor looks like a spaghetti monster. I have custom Mopar Performance valve covers and I am in the assembly/clean up process now. Discuss.

IMG_9232.jpg
 
Your choice. Route them for looks or route them for performance. There's no power to be gained, just problems to be avoided.
 
Passenger side easy, drivers side is a little more challenging to get neat. Also drivers side makes a difference if you manifolds or headers.

IMG_1240.jpeg


IMG_1241.jpeg
 
DSC00596.JPG


DSC00593.JPG


DSC00594.JPG


Straight boots don't have to be a mess...

1000000664.jpg


1000000672.jpg


I think the key is the 2 wire loom for the front wires in about the location of the original factory valve cover looms and then a 4 wire loom at the back to set that up:

IMG_0984.JPG


IMG_0985.JPG


IMG_1005.JPG
 
str12-340 said:
Straight boots don't have to be a mess...
Click to expand...
Nice example. The 'floating' wire seperators help too.
Factory examples shown here.
www.forabodiesonly.com

273 V8 spark wire routing, looms and grommets

I am hoping someone has a picture of how the spark plug wire were separated and routed from the factory and where to locate those pieces. I have searched over the web. Lots of stuff for big blocks… i have the valve covers with the spot welded tabs. Thank you.
www.forabodiesonly.com www.forabodiesonly.com

I don't see that square one very often.
 
SKR8PN said:
Going for looks.
Click to expand...
If your looking for ideas, this thread might be useful too
www.forabodiesonly.com

Engine compartment pics

Maybe I just couldn't turn it up in a search, but has there ever been a thread here for engine compartment pics? People have good ideas for air cleaners, catch cans, spark plug and heater hose routing, etc, and it would be good to have them all in one place. Mine isn't complete yet, but here's...
www.forabodiesonly.com www.forabodiesonly.com
 
Some of mines be rubbing on the wiper motor. My old wires and cap done threw away had plastic wire covers on some wires by wiper motor but threw out don't have no more.

MSD Street Fire came pre cut for small block mopar.

PXL_20240303_140546553.MP.jpg


PXL_20240303_140558181.jpg
 
I don't know what exhaust system you have, but anything that is even vaguely shaped like a drivers side 68-70 340 manifold those would not work with - wires need to stay higher then drop right down to the plugs. I have seen various header routings that stay above the head ports that would have the same issue.

IMG_1006.JPG
 
You must log in or register to reply here.
-

Back
Top