69GT
Well-Known Member
I have this lot of Spectre brand hex shaped hose clamp covers to sell. I bought them as a slightly larger lot to get the ones I needed for my cars and these are what I have left that I don't need. 48 are chrome, 60 are red anodized and 29 are blue anodized. They do not have the hose clamps. They are just the hose end covers. A few of the anodized ones have a couple of very small nicks in the coloring from being in contact with each other in a bag but not very noticable. The best I can tell by measuring them is that there are the following sizes/quantities.
Chrome
10 for 1 1/2” hose
9 for 3/4” hose
9 for 5/8” hose
20 for 3/8” or 5/16" hose (not sure)
Red anodized
12 for 1 1/2” hose
11 for 3/4” hose
13 for 5/8” hose
24 for 3/8” or 5/16" hose (not sure)
Blue anodized
6 for 1 1/2” hose
6 for 3/4” hose
5 for 5/8” hose
12 for 3/8” or 5/16" hose (not sure)
As I mentioned, I have put the same clamp covers on my car (except I am not using any of the smallest ones) and based the measurements compared to them but I may be off a little on some of them, particularly the 3/4” and 5/8” covers as they are close in size. The large 1 1/2” covers measure about 1 15/16” to 2” across the flats of the hex. The 3/4” measure about 1 1/8”, the 5/8” about 1 1/16”. The smallest ones I am not sure what size hose they are for but it looks like either 3/8” or 5/16". They are about 13/16” across the flats of the hex. Also included is a couple of pieces of braided hose cover that appears to be for very small hose but I’m not sure what size. I believe these covers usually sell for $6-$10 for one of the large ones or per pair for the smaller ones including the clamps. I would prefer to sell them as an entire lot (or each lot by color) rather than piece them out so I would be willing to take $1 a piece for a total of $137 for all or the corresponding total by color ($48, $60, $29). I will also include the shipping in the total price. PM me if interested.
Chrome
10 for 1 1/2” hose
9 for 3/4” hose
9 for 5/8” hose
20 for 3/8” or 5/16" hose (not sure)
Red anodized
12 for 1 1/2” hose
11 for 3/4” hose
13 for 5/8” hose
24 for 3/8” or 5/16" hose (not sure)
Blue anodized
6 for 1 1/2” hose
6 for 3/4” hose
5 for 5/8” hose
12 for 3/8” or 5/16" hose (not sure)
As I mentioned, I have put the same clamp covers on my car (except I am not using any of the smallest ones) and based the measurements compared to them but I may be off a little on some of them, particularly the 3/4” and 5/8” covers as they are close in size. The large 1 1/2” covers measure about 1 15/16” to 2” across the flats of the hex. The 3/4” measure about 1 1/8”, the 5/8” about 1 1/16”. The smallest ones I am not sure what size hose they are for but it looks like either 3/8” or 5/16". They are about 13/16” across the flats of the hex. Also included is a couple of pieces of braided hose cover that appears to be for very small hose but I’m not sure what size. I believe these covers usually sell for $6-$10 for one of the large ones or per pair for the smaller ones including the clamps. I would prefer to sell them as an entire lot (or each lot by color) rather than piece them out so I would be willing to take $1 a piece for a total of $137 for all or the corresponding total by color ($48, $60, $29). I will also include the shipping in the total price. PM me if interested.
