- Joined
- Apr 16, 2009
- Messages
- 5,515
- Reaction score
- 8,151
These came on a project car that I have purchased recently.
I would entertain selling without shafts and lash adjusters, or I may just have to part them out or throw them away.
They seem to be new never ran but bolted on a head. I cleaned then up and noticed a crack in on rocker on the lower side of the tip pin. Probably caused when pin was pressed and missed by QC.
They are complete other than that one rocker (pictured last photo) that will come with the set.
The Shafts and pushrod or lash adjusters (7/16ths-20) should be worth what i am asking for everything.
Fort Smith Ar. 72903
Personal check or PP/FF.
$125.oo plus the ride.
Thank you FABO!
I would entertain selling without shafts and lash adjusters, or I may just have to part them out or throw them away.
They seem to be new never ran but bolted on a head. I cleaned then up and noticed a crack in on rocker on the lower side of the tip pin. Probably caused when pin was pressed and missed by QC.
They are complete other than that one rocker (pictured last photo) that will come with the set.
The Shafts and pushrod or lash adjusters (7/16ths-20) should be worth what i am asking for everything.
Fort Smith Ar. 72903
Personal check or PP/FF.
$125.oo plus the ride.
Thank you FABO!
Last edited:
