Stock Magnum heads, rebuilt

[64physhy]

I'll try this again. Tried selling a while back with no success. This is a set of Magnum heads, no cracks, with a pretty-much stock rebuild with 5 angle valve job. Comes with the stock stamped rockers, guides, etc. Need the money to re-rebuild my stroker.

 

[Tnplumber]

Do you have a price?

 

[64physhy]

Oops, thought I put it there. Have $500 in them, Selling for $400 OBO

 

[64physhy]

Shipped for $400 OBO. Shipping will be close to $100, so I'm only getting $300.

 

[MopaR&D]

What kind of springs are on those?

 

[64physhy]

What kind of springs are on those?

Stock replacements. Everything stock except the valve job.

Sale Pending to MOPEkid-3

 

[MopaR&D]

Stock replacements. Everything stock except the valve job.

Sale Pending to MOPEkid-3

Would you happen to know how much lift they could handle from a hydraulic flat tappet cam? Or the pressure specs open/compressed?

 

[64physhy]

Carcraft put a cam with .515 of lift on stock Magnum heads. That's .515 with the stock 1.6 ratio rockers, not 1.5 rockers.

SOLD!!! Thanks FABO