Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
dukeboy440
Well-Known Member
Oh snap
shittyslant6
Well-Known Member
After thinking about it, i am going to fix it correctly.Hey all. Teflon tape on Brake lines? NO Good!!! I bought a nice hydraulic flare tool. To make lines for my 5th wheel, converted from electric to hydraulic disc.....
It was an act of desperation after chasing that leak for 3 hours.
dukeboy440
Well-Known Member
Brake fluid will eat Teflon tape
zkx14
Duster De-ruster
Got my garden stakes cut for the bird net over my blueberries... My son gets married Jun 5 and wife is putting the centerpieces together. She got these cool jars, but wanted the metal cages ivory instead of black. Needed a quick way to do a repaint production line. So, before I jam them in the ground, built this high tech structure. Lol
dukeboy440
Well-Known Member
That’s gonna kill the crypto market. I just took my 30 buck profit and bowed out. I’ll wait for a reentry point when things bottom
Musk says Mining crypto coin takes too much energy and much of it is fossil fueled... He says it might contribute to global warming.............
dukeboy440
Well-Known Member
This dude is just toying with folks.
that said, running that much computing power to mine it does eat a ton of power. A single mining computer can eat 1000 dollars a month in electric alone. But makes you 2-3k a month.
Still no word on mia muffler.
And my coil of brake line is held up over a $3.00 customs charge. I would think amazon had this figured out by now.
so decided to do a check on the blowby on the fargo. #6 has low compression and plug is wet. Added oil and up it went. Explains why it ran better when i was pouring atf down the carb. I dumped 1/4 cup of sea foam into the cylinder, will let it sit for an hour or so. There is a port into that cylinder to check for tdc. So pouring directly onto piston is a snap. Guess i will stuff a new plug in while im at it.
And my coil of brake line is held up over a $3.00 customs charge. I would think amazon had this figured out by now.
so decided to do a check on the blowby on the fargo. #6 has low compression and plug is wet. Added oil and up it went. Explains why it ran better when i was pouring atf down the carb. I dumped 1/4 cup of sea foam into the cylinder, will let it sit for an hour or so. There is a port into that cylinder to check for tdc. So pouring directly onto piston is a snap. Guess i will stuff a new plug in while im at it.
Unconventional
Well-Known Member
There were Elon digs at crypto during Weekend Update also
Condolences !
Well back from the water main dig. It was leaking 10 feet or less up from where we'd dug down to disconnect the yard spicket. A connecting coupler was loose on on one end like someone forgot to tighten it down. It took all of 30 minutes, and hopefully it's fixed.
Since the trencher was on a 4 hour minimum I had him dig a 30 foot long bucket wide drainage ditch from an overflow area to the creek. I put some drain tile down and threw some rock on it to hold it down. I'll go back in a few days and bury it.
Since the trencher was on a 4 hour minimum I had him dig a 30 foot long bucket wide drainage ditch from an overflow area to the creek. I put some drain tile down and threw some rock on it to hold it down. I'll go back in a few days and bury it.
Last edited:
Well today is a new day, and apparently CDC has yet changed the rules AGAIN!!
Vaccinated people can now unmask and meet in a indoor or outdoor setting AND with those who aren't yet vaccinated.
Never to they say anything about those who've had a strong case of covid.
My doctor says people who had a case like mine a year ago still are showing anti-bodies and t-cells at a higher rate than those who are vaccinated.
Vaccinated people can now unmask and meet in a indoor or outdoor setting AND with those who aren't yet vaccinated.
Never to they say anything about those who've had a strong case of covid.
My doctor says people who had a case like mine a year ago still are showing anti-bodies and t-cells at a higher rate than those who are vaccinated.
Ben Drinkin
Hey bartender!
Sounds like they're just winging it!
360/727 in transit. Woo hoo!
Set up the forklift, ready to pick it off.
So in an hour i will be devising a plan.
have been working on my mower, crankcase gasket failed. My knuckles look like i been fighting with a jackfish. All kind of little cuts. I’ll just smear some dirty grease over em, they’ll be aight...
Set up the forklift, ready to pick it off.
So in an hour i will be devising a plan.
have been working on my mower, crankcase gasket failed. My knuckles look like i been fighting with a jackfish. All kind of little cuts. I’ll just smear some dirty grease over em, they’ll be aight...
One of the towns in Itally that got hit hard early is the case study.
I'm sure if you search BBC world news you can find out who is doing the study and some details about hte findings so far.
Just got my second shot of pfizer vacs.
Well not just. Got waylaid by neighbors befoer I got back to the house. Then sat down with a cup of tea and sat down at the computer.
Now its time to go back up the long ladder.
(some of you may know the next line to that ditty, but that's not what I'm doing)
Well not just. Got waylaid by neighbors befoer I got back to the house. Then sat down with a cup of tea and sat down at the computer.
Now its time to go back up the long ladder.
(some of you may know the next line to that ditty, but that's not what I'm doing)
It looks like you are very happy with the cab mounts with all of the goo on the one in the second picture.... TMI...
I used to deal with Future Tool when I was at the engine plant... They do good work...
Surprised that you are so close to them...
They also made some parts for the Tomahawk - the motorcycle with the v-10 Viper Motor....
I'm only 35 - 45 minutes from either of our airports here if traffic is not heavy....
My grandma used to live 5 minutes away from O'Hare airport...
-
