Swaybar Info Reqeust

[longarm]

I'm in the process of installing a front swaybar
on my 1970 Dart Swinger.
It is supposed to be a factory correct and mounted part.
I must be having a brain fart because for the life of me
I can't seem to get it to fit correctly.
I didn't remove this part so I could have the mounts upside down
or turned around, who knows.
Anybody have a picture of the correct bar mounted in the correct way?
I sure would be obliged if you could help an old fart out.
Thanks,
Carl

 

[67Dart273]

First, are you sure you have the correct parts? The up to 73? mounted below the crossmember, are completely different, and use ears on the LCAs which are "low."

The 73/ later goes through the center of the K, are bent different, and the LCA tabs are higher on the LCAs

http://www.forabodiesonly.com/mopar/showthread.php?p=1969916173

http://www.forabodiesonly.com/mopar/showthread.php?t=234150

http://www.forabodiesonly.com/mopar/showthread.php?t=231939

 

[longarm]

Thank you very much, that's more than
I could have hoped for!
I did the search before I asked, don't know
why I didn't find the links, but good stuff it is.
The previous owner had removed the mounts
and painted the bar.
Thanks again!!!

 

[67Dart273]

Yur welcome. Post back if you don't get it resolved. I just finished up a 73/4 K on my 67, and just the other day, finally got the factory late model sway bar installed.

 

[HemiD@rt]

Yur welcome. Post back if you don't get it resolved. I just finished up a 73/4 K on my 67, and just the other day, finally got the factory late model sway bar installed.

What is the diameter of the stock sway bar for the 73+? 15/16 or 7/8?

Thanks