[WANTED] Thermoquad metering rods

[jasperjacko]

Hey guys, I'm looking for metering rods with the following numbers: 1962, 1965, or 1966. I would also be interested in strip kits containing them as well. I can do paypal. Thanks.

 

[EL5DEMON340]

Hey guys, I'm looking for metering rods with the following numbers: 1962, 1965, or 1966. I would also be interested in strip kits containing them as well. I can do paypal. Thanks.

I may have them along with a bunch of other parts in a nice plastic container. Also have a parts 850 cfm carb for parts. Would prefer to sell the whole lot . Also have some 71 t -quad and parts. I'll check Thursday.

 

[rumblefish360]

Bend AFB rods 3/4 of an inch shorter then clip the rod.

 

[jasperjacko]

Bend AFB rods 3/4 of an inch shorter then clip the rod.

really? have you done this?

 

[jasperjacko]

anybody?

 

[The Moffittman]

EL5DEMON340, I'd be interested in your pile of TQ stuff, I'd like to know more about it.. PM me, if you like.

Matt

 

[rumblefish360]

really? have you done this?

SOrry for the delay.

YES I HAVE! Works fine. Do realize the AFB rods are 2 step and the AVS rods are 3 step like the TQ rods.

If you clip them short, you'll have to grove the ends for the retaining clips. It is simple to do with a narrow file or a fine touch with a dermal and cutting wheel. You can use a spring "C" clip like on the carter carbs to hold the rod in and straight.