Time to play " WHATS THIS PART " again !

[RAT ROD AL]

Can anyone give some info on what these parts are from ? Thanks in advance !!
@HemiSSDart
First up is this fan ???

Next is this.
Pretty sure an A body console bracket !

Last but not least the rear springs. Hotchkis ???

 

[4spdragtop]

Yes to console bracket, pretty sure it's A. Width measurement?

 

[RAT ROD AL]

Yes to console bracket, pretty sure it's A. Width measurement?

Didn't measure ! DAH !

 

[HemiSSDart]

Can't read the yellow stamped part number on the back of the fan, can you take a close-up pic of that? Looks a lot like the Hemi fan, but where the blades attach is different.

 

[Cuda Al]

Can't read the yellow stamped part number on the back of the fan, can you take a close-up pic of that? Looks a lot like the Hemi fan, but where the blades attach is different.

ENGINE SIDE

Alan

 

[RAT ROD AL]

Can't read the yellow stamped part number on the back of the fan, can you take a close-up pic of that? Looks a lot like the Hemi fan, but where the blades attach is different.

Yellow stamp reads "engine side "

 

[HemiSSDart]

Yellow stamp reads "engine side "

OK, there is usually an ink stamped part number. I will see what else I have on it...

 

[RAT ROD AL]

I found this on the fan , but not much help really.

Help ID this 7 Blade Aluminum Fan - Moparts Forums

 

[HemiSSDart]

I found this on the fan , but not mush help really.

Help ID this 7 Blade Aluminum Fan - Moparts Forums

If it is 18" diameter probably a 66-67 small or big block, the later aluminum fans are 20" diameter

 

[HemiSSDart]

I found this on the fan , but not mush help really.

Help ID this 7 Blade Aluminum Fan - Moparts Forums

Yes, the triangular type is the Hemi fan for the L0/B0, I have a couple of them. 18-1/2 has a 2-1/4 pitch 68-73. Notice the one you have has a balancing weight on it, the Hemi fan does not...

 

[Garrett Ellison]

1967-1976 Dodge A-Body Geometry Corrected Leaf Springs

 

[RAT ROD AL]

1967-1976 Dodge A-Body Geometry Corrected Leaf Springs

That's what I found also. But those have their logo painted on them. Look the same.

 

[Garrett Ellison]

The Hotchkiss are 3 leaf. I see four on these, do they have more leaves in the center?

 

[RAT ROD AL]

The Hotchkiss are 3 leaf. I see four on these, do they have more leaves in the center?

 

[qkcuda]

That fan looks a lot like the fan in my 66 Charger with factory A/C. I added a picture.

 

[rbkt65]

fan looks like the ones on my 81-89 trucks. just saying. agree with steve on console bracket.

 

[RAT ROD AL]

The Hotchkiss are 3 leaf. I see four on these, do they have more leaves in the center?

I believe these are the same, just don't know why no logo on mine !
I think I have the single hole hanger bracket also.

 

[leechris81]

I believe these are the same, just don't know why no logo on mine !
I think I have the single hole hanger bracket also.
View attachment 1715975620

I have the Hotchkis springs on mine and they didn’t have the logo on them. Just the part numbers.

 

[RAT ROD AL]

I have the Hotchkis springs on mine and they didn’t have the logo on them. Just the part numbers.

Same part number as mine ? Notice any difference in the ride / performance ?

 

[moparmarks]

Hey Al if that console bracket is for a body I could use it

 

[RAT ROD AL]

Hey Al if that console bracket is for a body I could use it

Mark, I already donated that to another friend.

 

[RogerRamRod]

My Hotchkis springs have the same part number, except with FE after it, not DH.
They are four leaves on the front half, three after the axle.
They did not have Hotchkis marked on them, but under the black paint I could see a previous stencil that said Grab A Trak, known more in the mustang crowd.

 

[RAT ROD AL]

My Hotchkis springs have the same part number, except with FE after it, not DH.
They are four leaves on the front half, three after the axle.
They did not have Hotchkis marked on them, but under the black paint I could see a previous stencil that said Grab A Trak, known more in the mustang crowd.

Well I'm gonna call these Hotchkis Springs when I list them for sale !
Thanks guys for all your help.

 

[leechris81]

Same part number as mine ? Notice any difference in the ride / performance ?

It appears to be the same number but DJ following it. As for ride and performance I love them. Cars sits considerably lower and rides/corners well. Definitely worth the money IMO. I don’t have a lot of experience with anything else though as they immediately replaced the 45 year old, worn out, stock springs that were on it when I bought it. I posted the best pic I have of the springs.