Tool Needed

[partmopar]

I am in need of a tool or a way to put my newly painted dash back together. I need to tighten down the nuts ? on the light switch flasher switch wiper switch etc even one for the key switch. Any leads would be nice.
For a 67 dodge dart
Thanks

 

[4spdragtop]

I know the part you are talking bout I bought one off of ebay for $10 well well worth the $$ lemme see if I can get you a link.

 

[4spdragtop]

Ok, I couldnt find one exactly the same as I bought, and dad is using mine on his 67 cuda dash. Here is a link to something that may work for you, if you want I can get pics of mine if I go to dads today
http://www.ebay.com/itm/MOPAR-1967-...r_Truck_Parts_Accessories&hash=item3a74b655a2

 

[mcode]

Go to Ebay Motors and type in Mopar switch tool.

 

[TrailBeast]

I just use the points of a pair of needlenose pliers.

 

[72ScampTramp]

what i find that works is snap ring pliers with the straight nose

 

[RedFish]

I'm guilty of using aternative tools to tighten the bezel nuts too. Speaking from experience, Just one bad move can ruin the day. The cost of the proper tool is a small price paid to prevent that big ugly scratch on a new or like new bezel.

 

[abodyjoe]

Go to Ebay Motors and type in Mopar switch tool.

http://motors.shop.ebay.com/i.html?...143.m570.l1313&_nkw=Mopar+switch+tool&_sacat=

 

[HemiMark]

I am in need of a tool or a way to put my newly painted dash back together. I need to tighten down the nuts ? on the light switch flasher switch wiper switch etc even one for the key switch. Any leads would be nice.
For a 67 dodge dart
Thanks

Don't take a chance on scratching your newly painted dash. Buy the tool!

 

[barracudakid]

amen on the tool!
i broke a very nice bezel trying to remove the flasher nut with a screw driver.
a very bad day!

 

[4spdragtop]

http://motors.shop.ebay.com/i.html?...143.m570.l1313&_nkw=Mopar+switch+tool&_sacat=

Thats the one I bought and well worth the $$!! Get it and know you did the right thing and using the right tool

 

[partmopar]

I found a comlete set from CudaJunction on this board. Thanks for all the responses.

 

[HemiMark]

Thats the one I bought and well worth the $$!! Get it and know you did the right thing and using the right tool

on another topic. Didn't your last avatar have someone in a neck brace? LOL

 

[4spdragtop]

on another topic. Didn't your last avatar have someone in a neck brace? LOL

I lost the neck brace and put on a few pounds!