Torsion bars 72 340 DUSTER

-
A

AJDUSTER72

Member
Joined
May 21, 2005
Messages
6
Reaction score
0
How do I know or measure the size of my
torsion bars. The only numbers on the bar
are UPX 893L ANY HELP OUT THERE.
Thanks AJ
 
The 893 is the last three digits of the mopar part number. The other one will be one digit different. I have a listing by part number at home that I will post if no one else does and I think you can get the list from the mopar performance catalog on there web page, certainly you will find it if you search the web.

If your car is an original 340 car that has not been modified the bars should be 0.870" in diameter. The next smaller bar is 0.850" and the next larger is 0.890" so if you have a set of calipers you should be able to measure accurately enough to figure out what you have.
 
.870" 120#/in p5249149 (2535892-3) 318 w/ air--340 std bars
 
ADAM
THANKS those numbers are the Summit raceing cat. numbers grt help
thanks AJ
 
892 goes on the right hand side, 893 goes on the left. Should be a blue stripe of paint on the right, and two blue stripes on the left.
 
That's also why there is an "L" following the 893. Would have been a lot easier for us all, if they would have had the diameter stamped into one end.

Jerry
 
You must log in or register to reply here.
-

Back
Top