tranny linkage

[red_duster74]

hey i just swapped motors from a /6 to a 318 and i am going from a 904 from the slant to a 904 with the 318 housing. how would i convert the linkage to fit and operate and also the kickdown linkage to work. minor bump in my build... any help highly appreciated
thanks michael

 

[Rocky_JS]

hey i just swapped motors from a /6 to a 318 and i am going from a 904 from the slant to a 904 with the 318 housing. how would i convert the linkage to fit and operate and also the kickdown linkage to work. minor bump in my build... any help highly appreciated
thanks michael

do you have the v8 linkage? If not I might would have to look in the garage tomorrow.

 

[bbizelli]

My car has a weird linkage on it when i bought it i dont believe it is the correct which is why it isnt working. But i just got my lokar kickdown cable and throttle cable got the entire set up from jegs for less then 150. It seems like it should work pretty good and easy to install. Might be something you may want to look into. Ill let you know how the install goes when i do it sunday if ya want?

 

[Moparparts]

The 904 linkage and the 318/904 linkage are the same. The kick down is totally different from 6 to v-8 and you would need to replace it. I have the v-8 kickdown linkage PM me

 

[Moparparts]

The 6/904 and 318/904 shifter linkage are the same

 

[cudamark]

If the 318 is a 2bbl, I should have the kickdown linkage assy.
Thanks, Mark

 

[red_duster74]

no i have the kickdown for the /6 and no my 318 has a holley 4bbl and yes i am interested in the kickdown linkage