[WANTED] True B body 8 3/4 housing

-
Status
Not open for further replies.
I have a 68-70 housing that's nice and a 65-67 with axles.... Both true b body rears.pms for pics and prices
 
I'm parting out a 67 B Body that has the housing, axles, brakes and if needed a pumpkin (think 2.76 gears but need to verify that.
 
I have 68-70 axles, and a 741 3.23SG center so I need B body 10" or 11" drums, and a 68-70 housing

I have a C body housing with A body ends on it, as well as complete A body 10x2.5" drums

PM's sent!
 
zac_F71 said:
I have 68-70 axles, and a 741 3.23SG center so I need B body 10" or 11" drums, and a 68-70 housing

I have a C body housing with A body ends on it, as well as complete A body 10x2.5" drums

PM's sent!
Click to expand...

i'll check on my rear,get you some pix and also i have a set of 10" rear brakes...loaded and complete.

bbp 7&1/4 backing plates will fit the 8&3/4 too and are 10" x 2.5"
 
I have a 70 GTX 8 3/4 housing and a pair of 11 x 2 1/2 HD finned rear drums that have already been turned PM me if you still need and are interested
 
I have one listed for sale with axles under mechanical parts for sale - $175 for all, but I could split it to sell just the housing.
 
mikebee said:
i'll check on my rear,get you some pix and also i have a set of 10" rear brakes...loaded and complete.

bbp 7&1/4 backing plates will fit the 8&3/4 too and are 10" x 2.5"
Click to expand...
I will take a closer look at mine and let you know Mine are 73 A body 10x2.5, and I'm 90% sure they do not have the same flange bolt pattern that B bodies do.. - as I eyed them once before and they looked the same pattern as my housing's end's - not the B body style..
 
I have a B body housing only (not certain if 66-67 or 68-70)
44 inch center to center on the pads, I'll measure the overall length and take a pic of the tape measure if you are interested. $50 plus the ride.
 
Status
Not open for further replies.
-

Back
Top