-Sledgehammer-
Mopar Performance
Finally got the dana done and got all the internals and such of DoctorDiff.... :thumb:
Caltracs system courtesy of Promax is the-1 setup and a 1" lowering block in there also to get the ride height I wanted! :thumb:
I had a 8 3/4 in there and I went a little narrower to 44" flange to flange on the dana housing... rims are 15*10 with 3 3/8 backspace and have about 3/4" clearance on each side of the wheel! Went with discs in the back also courtesy of the doctor also..... :thumb: I had the windows tinted 35% also....
Caltracs system courtesy of Promax is the-1 setup and a 1" lowering block in there also to get the ride height I wanted! :thumb:
I had a 8 3/4 in there and I went a little narrower to 44" flange to flange on the dana housing... rims are 15*10 with 3 3/8 backspace and have about 3/4" clearance on each side of the wheel! Went with discs in the back also courtesy of the doctor also..... :thumb: I had the windows tinted 35% also....
