upper ball joint

-

1973dusterkid

Watch This
Joined
Jul 17, 2011
Messages
2,270
Reaction score
68
Location
Buford Georgia
How do you remove the upper ball joints from the control arm on a 73 duster do the screw in and out or press in and out.
 
Their screwed in. The threads in the arm are easily stripped too. BP Blaster and a ball joint socket.
 
And a little heat on the A-arm around the joint works wonders. The right socket makes it easier also. Make sure when you start to install the new joint that you make sure it is going in square, they are easy to get cocked in the hole.
 
-
Back
Top