Cuda416
Well-Known Member
Question for those who do their own valve work. What are the correct cutter diameters to get? Looking at the neway guide, I get ...
Intake: 48.77+3.18 mm = ~52mm ~ 2.05 in
Exhaust: 40.64 + 3.175 = ~44mm ~ 1.73 in
Do those seem about right?
Intake: 48.77+3.18 mm = ~52mm ~ 2.05 in
Exhaust: 40.64 + 3.175 = ~44mm ~ 1.73 in
Do those seem about right?
