scuba0331 Well-Known Member Joined Jan 31, 2008 Messages 1,032 Reaction score 17 Location Ohio Apr 27, 2010 #1 Does the rear vent window on a 74 Duster have to come apart to install new weatherstripping? Thanks!
70Duster440 Well-Known Member Joined Jan 8, 2006 Messages 2,692 Reaction score 435 Location Washington Apr 27, 2010 #2 Yes. Drill out the 1 piece rivets that hold the frame together (top/bottom corner). Use short pop rivets to reassemble. Instead of a single long rivet that runs through the frame you'll use two - one on either side - both top and bottom.
Yes. Drill out the 1 piece rivets that hold the frame together (top/bottom corner). Use short pop rivets to reassemble. Instead of a single long rivet that runs through the frame you'll use two - one on either side - both top and bottom.
scuba0331 Well-Known Member Joined Jan 31, 2008 Messages 1,032 Reaction score 17 Location Ohio Apr 28, 2010 #3 Thanks Preston! You have helped me many times with answers. Also, I have used your website several times as reference. Very helpful! Thank you!
Thanks Preston! You have helped me many times with answers. Also, I have used your website several times as reference. Very helpful! Thank you!
70Duster440 Well-Known Member Joined Jan 8, 2006 Messages 2,692 Reaction score 435 Location Washington Apr 28, 2010 #4 No problem - thanks.
scuba0331 Well-Known Member Joined Jan 31, 2008 Messages 1,032 Reaction score 17 Location Ohio Apr 28, 2010 #5 Drilled them out, added a little WD 40 and reinstalled in less then 15 minutes. If I was only smart enough to order the felts I would have been done! Thanks
Drilled them out, added a little WD 40 and reinstalled in less then 15 minutes. If I was only smart enough to order the felts I would have been done! Thanks