Went to the garage to bring the Demon over. My son was cutting a viper head to see ports and seats. They want to see how much room for larger seats and to angle mill the deck
Viper Head
- Thread starter Oldmanmopar
- Start date
-
I have no clue . I saw it was 5 cylinders and asked what it was for and he told me Viper race car,
If you cut off one cylinder, would that head bolt onto a 340/360?
74 360 dart sport
Well-Known Member
That is really cool having that kind of knowledge thank's for the post
thesiren74
Well-Known Member
I think the bolt pattern is different.
diymirage
HP@idle > hondaHP@redline
Schumacher has an adapter kit available.
OMM, can you post a picture of the intake port cross section?
DionR
Well-Known Member
For years I've wished they had done a V8 version of the Viper V10. I'm no expert but sure seems like it could have had been a good one.
DionR
Well-Known Member
Interesting. There actually were V8 Vipers built for racing due to a "if we can't beat them, legislate them out of competition" mindset. A rule change made the 8.0 V10 noncompetitive so they blanked the front 2 cylinders and ran them as 6.2 V8's. Custom crank and cam, no rods or pistons, plugged the lifters and left the valves and springs in place. Made like 620 hp. Pretty cool!
V8 Dodge Vipers Do Exist (Viper Week 2021) - Cody's Car Conundrum
thesiren74
Well-Known Member
That thing sounds bad ***!
My words exactly!!
- Joined
- Mar 17, 2018
- Messages
- 14,749
- Reaction score
- 34,414
Ok that’s funny right there!
gzig5
Well-Known Member
I'm curious in what way you think a V8 version would be better or needed over the V10? The the HP from the V10 is nearly unmanageable except by a good driver. What it needed was a sophisticated traction control system with an on/off switch.
DionR
Well-Known Member
I think the V10 was cool and a V8 based on it would have made a neat motor. Not saying the Viper would have been better with a V8. Other than the sound, I struggle to enjoy the audio characteristics.
And I don't think it would be reasonable to spend the time or effort to cut one down either. A 408 with good heads would probably be comparable.
I just think it would have been a cool evolution of the Magnum to build an 8/10th Viper motor. Made no viable sense for Mopar to do it since they had absolutely nothing to put it in so not saying they missed the boat. Just daydreaming about what-if's.
With twins they are getting 3200 HP
No
Dale Davies
Well-Known Member
I would think a sonic thickness tester would be inexpensive compared to a Viper head.
-
