W2 top end

[rt66jim]

Complete top end off my 416. W2 heads ported by RyanJ @ Shady Dell. I have the flow sheet on them. MP 2.02-1.60 valves, Isky springs and Herbert TI retainers. MP/Crane 1.6 ratio roller rockers and E-Brock Victor W2 intake. $2200 + frt PM me here

 

[LXguy]

What cam/carb were you running with this setup?

 

[rumblefish360]

Can you post pictures, flow specs, head part number, chamber cc amount?

 

[73dart360]

RT are you going with a different setup ?

 

[rt66jim]

Can you post pictures, flow specs, head part number, chamber cc amount?

I can e-mail a copy of the head flow sheet if you will PM and e-mail address. The chambers are 73cc. I will look this evening and get the casting #'s. They are long valve econo W2 castings.

 

[rt66jim]

RT are you going with a different setup ?

Going to have some W9's done. Jim

 

[rumblefish360]

The head flow numbers!

Intake

.100 62.3
.200 133.7
.300 190.3
.400 238.7
.500 275.5
.550 290
.600 302.3
.650 307.3
.700 305.6

Exhaust

.100 51.1 (82%)
.200 104.7 (78.4%)
.300 146.4 (76.0%)
.400 173.4 (72.6%)
.500 185.5 (67.3%)
.550 191.5 (66.1%)
.600 196.4 (65%)
.650 201.2 (65.5%)
.700 203.7 (66.6%)