w7smallblock
Well-Known Member
W7 heads and rotating assembly for 9.00 deck motor 4.155 bore 4.00 stroke for 434CI
RARE CNC'd Chapman 296cc runner W7 heads angle milled to 13 degree
47cc chamber 2.20 intake and 1.625 exhaust valve size
T&D 1.6 rockers (not shown)
Custom Moldex billet 4340 crankshaft 4" stroke 340 mains 1.88 rod. Crank weighs 48lbs
GRP 1400 series aluminum rods
CP custom strutted pistons 4.155 bore
Custom Comp Cam billet solid roller
IN/Ex
adv dur 318/335
[email protected] 282/294
776/739 lift with 1.6
lobe sep 112
Rotating assembly has been balance ready to install have rod & main bearings and rings also. Everything was bought through Ryan at Shady Dell and balance there as well.
Everything is NEW not used.
Asking $5,000 obo + shipping
located in Hyndman PA 15545
can deliver to mopar Carlisle
RARE CNC'd Chapman 296cc runner W7 heads angle milled to 13 degree
47cc chamber 2.20 intake and 1.625 exhaust valve size
T&D 1.6 rockers (not shown)
Custom Moldex billet 4340 crankshaft 4" stroke 340 mains 1.88 rod. Crank weighs 48lbs
GRP 1400 series aluminum rods
CP custom strutted pistons 4.155 bore
Custom Comp Cam billet solid roller
IN/Ex
adv dur 318/335
[email protected] 282/294
776/739 lift with 1.6
lobe sep 112
Rotating assembly has been balance ready to install have rod & main bearings and rings also. Everything was bought through Ryan at Shady Dell and balance there as well.
Everything is NEW not used.
Asking $5,000 obo + shipping
located in Hyndman PA 15545
can deliver to mopar Carlisle
