wanted 4 bbl manifold

[pauliehans]

Hey everybody, I'm new to the forum, I have a 65 barracuda and I'm looking for a 4 bbl manifold, I have the carb, this is prob a common request, lol, but if anybody has one, of knows what will fit the 273, I'd appreciate it
Thanks!

 

[65Val]

Here's a stock one on ebay....


http://www.ebay.com/itm/Stock-1964-...ies&hash=item33813080ce&vxp=mtr#ht_203wt_1159

You can also use aftermarket ones...Edelbrock LD4B, or a 318 Performer (small ports), or SP2P.

 

[Sreyno]

I have one off a 66 barracuda.$50.00 and you pay for shipping. It's yours.

 

[RedFish]

There is a slight difference in the intake to head bolt size and angle but easily adjusted.
So is there an advantage to altering an intakes bolt holes to work with your 65 heads ?
Yes. Any dual plane intake will give you better low end torque.
Any cast iron intake weighs approx. 50 pounds so shipping is costly.
Aluminum intakes ship for cheap by comparison and perform better too.

 

[pauliehans]

Yeah, that sounds good, I'm in SC

 

[gregpurcell]

To reiterate Red's point: The ANGLE of the bolt entry on 65 intakes are somehow different, meaning the 66 up intake would not fit without some mods. You might want to check that out more before buying a later one.