[SOLD] Wanted passenger front frame abody

-
Status
Not open for further replies.
got a 71 dart with great frame rails front and rear. I have lots of parts make me a offer
 
I have a complete rail. Shipping to Canada would likely have to be something other than USPS IIRC.

Be much easier if you could pick it up in Buffalo/niagara... Could go greyhound pretty cheap, even fedex ground to a warehouse on cudaback if necessary..
 
How much frame rail do you need? Full rail, or just a section to graft? If just a section, I've shipped them in large Flat Rate Boxes. Can get nearly 2 feet in those boxes.
 
whitepunkonnitro said:
How much frame rail do you need? Full rail, or just a section to graft? If just a section, I've shipped them in large Flat Rate Boxes. Can get nearly 2 feet in those boxes.
Click to expand...

Hey,

I'm looking for about 1 foot 10 inches total with solid control arm mounts. If possible i need 7 inches forward and backwards of the most outside control arm mounts with roughly 9 inches high from the bottom of the frame for the inside control arm mounts just before the curve under the shock hole. I'm just going to graft a piece in since the rest is solid, no idea what happened but there must have been a leak around the top shock mount hole to allow water to run down and pool at the base of the control arm mounts? But thanks for all the responses i replied to a couple and will continue down the list till i find something

Thanks in advance
Dan
 
Status
Not open for further replies.
-

Back
Top