Water pump and camshaft tips needed

[Bob.B.]

Hi guys,
I m in the market for a high flow water pump to get more cooling for my 440 big block I was wondering if I could get some tips on who s the best manufacturer for one and also a camshaft for a good size torque and overall performance. I would appreciate any tips I can get. :thumbup:

 

[dusterdon]

Try 440source.com for the water pump. they have high volume aluminum ones really reasonable. If you want an aluminum housing too, they have a nice package deal. For a cam for a bb mopar, you can't go wrong with one of the extreme energy Comp cams. I believe their phone is 1-800 camhelp.

don

 

[Bob.B.]

Try 440source.com for the water pump. they have high volume aluminum ones really reasonable. If you want an aluminum housing too, they have a nice package deal. For a cam for a bb mopar, you can't go wrong with one of the extreme energy Comp cams. I believe their phone is 1-800 camhelp.

don

MANY THANX DON :thumbup:

 

[demon seed]

Over the years I have done quite a few Mopar BB's and have found that the best way to keep these monsters cool is investing in a good radiator, 3 row minimum, and shrouded fan. Nowadays with the availability of reasonably priced aluminum units I plan on going in that direction from now on. Just my opinion. :burnout:

 

[Bob.B.]

Over the years I have done quite a few Mopar BB's and have found that the best way to keep these monsters cool is investing in a good radiator, 3 row minimum, and shrouded fan. Nowadays with the availability of reasonably priced aluminum units I plan on going in that direction from now on. Just my opinion. :burnout:

Thanx Demon :thumbup: