[SOLD] Weiand 8007 Intake for Small Block Mopar

-
Status
Not open for further replies.
mopar_nocar

mopar_nocar

Well-Known Member
Joined
Jul 26, 2005
Messages
477
Reaction score
105
Location
Center Point, TX
Rating - 100%
7   0   0
Contact seller
Had this on here before, but gonna' try one more time. Almost no hours on this thing, but it was on and off a cpl of times. It does have the by-pass nipple (which is NOT included with a new one), a thermostat and housing, a spread bore to square bore adapter, and temp sender for factory gauge.

So, intake plus all the stuff that you need for the intake will set you back $150 shipped to the lower 48. It is packed and ready to go.

weiand_intake.jpg


IMG_20180620_173818.jpg
 
Made this offer to another member, so thought I would update it here. If you don't want all the "stuff" that comes with it, I will ship it to the lower 48 for $125.

The "stuff" I speak of is: thermostat housing/thermostat, heater hose fitting, carb adapter, pipe plug for vacuum, bolts/washers, bypass hose, temperature sender, throttle return bracket and bypass hose fitting. In other words, just the intake.

sb
 
Not sure why this intake seems to make some folks angry. Lists for a hair over $230 on summit. To get it to my door (taxes) from summit would take $249.43

With all goodies -> $150 to the lower 48

Minus the goodies -> $125 to the lower 48
 
Status
Not open for further replies.
-

Back
Top