What do I need for this pully setup

[1973dusterkid]

Ok so I have a 1973 plymouth duster with power steering.I pulled the /6 and put in a 1971 360 in it.I have the pump brackets and pully for the ps off a 71 318 A/C car.The water pump crank and atl line up but the PS does not.What pullys or brackets do I need.

 

[abodyjoe]

are you keeping the a/c ??



this is for non a/c

 

[1973dusterkid]

Not keeping ac thats 170 dollars not including ps pully were car I get the ps pully to match.

 

[abodyjoe]

Not keeping ac thats 170 dollars not including ps pully were car I get the ps pully to match.

buy used pulleys and just use the pictures for the measurements..

I have the pump brackets and pully for the ps off a 71 318 A/C car.

if you have a 71 318 pump with pulley that should work. the a/c and non a/c v-8 pump and brackets are the same i believen

 

[abodyjoe]

how about you take a good picture of what you have so we can see better where the issue is..

 

[abodyjoe]

use pictures here as reference... http://www.forabodiesonly.com/mopar/showthread.php?t=209663

 

[1973dusterkid]

Well the ps pully is bent but even if it was stright it would not line up with crank not sure whats going on.

 

[abodyjoe]

Well the ps pully is bent but even if it was stright it would not line up with crank not sure whats going on.

take pictures so we can help ya. we can not tell where the issue is without pictures..

 

[abodyjoe]

without better pics its hard to tell what is going on..


from this pic i looks like you have the wrong water pump pulley

 

[abodyjoe]

not sure what else i can tell ya.. this is the second thread you asked about the pulleys. i gave you the answers in the last thread and am telling you again what you need....

measure your pulleys against the ones that you think are too expensive.

 

[1973dusterkid]

I will get more pics monday.

 

[abodyjoe]

that works.. make sure you get the complete set up in your pics.. we need to see what exactly is going on..