Wheel spacer

[1973dusterkid]

i am looking for a spacer about 1/2in to 1in thick and 5on4 bolt pattern

Have cash

 

[Big D]

i am looking for a spacer about 1/2in to 1in thick and 5on4 bolt pattern

Have cash

I also have a '73 duster and used a half inch spacer. These are very cheap and can be found at Jegs, Summit or any place that sells wheels. Make sure you have measured the backspace and fender well correctly. And if you are thinking of anything thicker than a 1/2", you should be installing new studs.

 

[1973dusterkid]

I also have a '73 duster and used a half inch spacer. These are very cheap and can be found at Jegs, Summit or any place that sells wheels. Make sure you have measured the backspace and fender well correctly. And if you are thinking of anything thicker than a 1/2", you should be installing new studs.

I was going to get new studs i need a 1in spacer but cant find one with the right bolt pattarn

 

[Boogercj7]

I have a set of 4, 1 1/2" spacers/adapters. They are the 5 x 4 bolt pattern that you are looking for. Asking $100 OBO.

 

[1973dusterkid]

I have a set of 4, 1 1/2" spacers/adapters. They are the 5 x 4 bolt pattern that you are looking for. Asking $100 OBO.

what do you want for 2

 

[pntastar69]

Doesn't the 73's have large bolt pattern?

1.5" spacers????? You are really pushing it but, hey, its your car.

 

[1973dusterkid]

Doesn't the 73's have large bolt pattern?

1.5" spacers????? You are really pushing it but, hey, its your car.

no it 5x4

 

[Bad Sport]

Have you measured it properly?

 

[1973dusterkid]

i have a wheel that is 5x4 and it fits