Slappy
Well-Known Member
Will a 10 inch wide wheel fit on my Demon? I have an 8 3/4 rear. Will I have to move the springs in?
Will 10 inch wide wheels fit my Demon?
- Thread starter Slappy
- Start date
-
I'm pretty sure you'll have to relocate the springs or jack it up high, high in the sky......:toothy10:
67dartgt2
67dartgt2
simple have you rims custom make to the proper of set plenty of room in the demon and dusters compared to the 67-76 darts
Slappy
Well-Known Member
Thinking of buying wheels from a member and the rears are 10 inch wide.
larry b
Well-Known Member
slappy im tying to do the same thing i have weld draglites 15x10. 5.5 b/s
with a 28x12.5 15 mickey et street tire i posted this question on the tire & wheel forum and didnt get any answers.
if you do can you please pm any info if you get some solid answers
maybe we are just wishfull thinking
thanks
with a 28x12.5 15 mickey et street tire i posted this question on the tire & wheel forum and didnt get any answers.
if you do can you please pm any info if you get some solid answers
maybe we are just wishfull thinking
thanks
Purple Haze
Well-Known Member
A tape measure is your friend, and can answer your question if you use it and know the section width of tire to be used.
zhandfull
Well-Known Member
I run a 10" wide rim with 28X12.50 MT ET tires on my Demon pretty tight fit. I have 5" backspace and have the 3/4" spring relocate on each side with stock wheel wells.
I believe you could run a stock (unmodified) setup with a 10" wide wheel and about a 4-3/4" to maybe 4-1/2" backspace might have some rubbing depending on your tire choice and car height. Me personally I would look for about a 4-3/4" backspace and you could always use a spacer to move tire away from spring if you have to.
I believe you could run a stock (unmodified) setup with a 10" wide wheel and about a 4-3/4" to maybe 4-1/2" backspace might have some rubbing depending on your tire choice and car height. Me personally I would look for about a 4-3/4" backspace and you could always use a spacer to move tire away from spring if you have to.
pupjoint
pupjoint
Im running 9" wheels 5.5 back space on my 74 duster, with 295-50-15, springs had to be moved. Have only about 1" clearance in side fender to tire, outside is full.
Plumcrazyfreak
Well-Known Member
They will fit if you move your springs in 3/4". I'm running 10" with 5" back space. 70 Duster.
moparnocar
moparnocar
I use old 10" Centerlines with a 4.5" backspace, 28x10.5 Hoosiers slicks, I had to roll the quarter panel wheel lips for clearance, but the S/S springs are in the stock location (I flipped the front hangers to lower the ride height). I also use 275x60's street tires on those wheels, they look like they might fit without rolling the lip???
-
