Will a GM Turn Signal Switch fit in Mopar Steering Column?

-

jty5010

Member
Joined
Apr 29, 2021
Messages
5
Reaction score
2
Location
Pittsburgh, PA
Stupid question, I know. Currently working on a 74 Dart Sport, for which I bought a universal harness, that has a GM connector for the column wires. Looks like Im going to need to replace the turn signal switch in the car as well, and was wondering if anyone knew if a GM turn signal switch would fit? That way, no messing with repinning and ehat not.
 
If it is a Saginaw column, you can probably find one that works. I have a Saginaw tilt colunm in my Power Wagon and needed a TS switch. They were hard to find and expensive. I used a GM switch and it worked perfectly. The wire colors were different, and I tested all circuits with an ohm meter before hooking it up.
 
...........Back when individuals spent time "browsing" junk yards............. LOL
 
Some tilt-column C bodies have an adapter harness, if they used the Saginaw column.
 
Maybe.....to me it would be easier to wire the Mopar switch to the GM harness. It shouldn't take too much effort.
 
-
Back
Top