Will this fit?

[Tony Fields]

This is a driver side 360 manifold from a 1972 Dodge Polara.

If the Dakota rear dumps fit A bodies, then I'm thinking this might fit also.

Has anyone used one of these on an A body?

Please advise if you have any info

Thanks,

 

[memike]

I have never used one,Just make sure it don't go toward your steering shaft.
measure the size of the out let and inlet hole's and compare it to the other
one so the flow pressure is even.

 

[OldVart]

Tony, is this for an early or post-67 A body. It MIGHT fit a 67 or later, but I don't think it will fit in a pre-67. It looks like the outlet will be pointed right at the steering shaft and box.

 

[Tony Fields]

The reason I'm asking about the manifold is that I will not be able to try it
for another 2 or 3 months. My 360 is at the speed shop waiting for the final balance on the rotating assembly
before it can be assembled. The balance was complete, then I decided to step up to another cam
which caused me to change out the torque converter. Just trying to round up parts and have a plan when
I get my engine back.

Thanks for the replys

 

[7demon2]

i can't say for sure but it looks like it would bolt up ok. it will dump out in a different place that is for sure. might work, might not.....

 

[Tony Fields]

The one I used for the photos is for a 273/318 with the small
ports.


Does anyone know if such a manifold exists as I have it
illustrated?


I think this is what I really need for the driver side on my 360 which
will have the Eddy Performer Alum. heads.

 

[Wilnutt]

wait???we can you dakota exhaust manifolds??? i'm tryin' to find a cheap way to clean up mine???maybe getitn' new ones are cheaper