Yes, that was with the baseline tune.Was that with the same tune? Or?
Yes, that was with the baseline tune.Was that with the same tune? Or?
Curious , how much did Coan want for a special street convertor ??Compression should be higher, cam is mild.
The convertor was made by Coan for my combo for 99% street use. They said IF it were a race car or a real street strip car that saw a decent amount of track time, they'd set the flash stall to 5k, (500 RPM over max tq)
It is definitely a waste of money!!! I have owned this car for 25 years and have just tried to make it the very best every piece can be.
maybe , but its fun to smoke a hellcat on the hi way ...Exactly! Anything more is just braggin' rights!
Curious , how much did Coan want for a special street convertor ??
Yes they wereDidn’t you have a pic of your engine on the dyno with some fender well type headers?
Were those the 2.125” ones?
My engine builder estimated i'd see 15 to 20 hp going to the 2.125 TTI headers from the 2".My 470 header swap from 2 inch fender well to 2.125 tti step under chassis headers was a 26 HP gain.
Surprisingly the fit perfectly in the car with torsion bars .