Wiring a coil on a 69 340

[buickboy]

Sounds like a high schooler question but it is a real question due to my stupidity. I was changing coil after marking the 2 neg side wires. did not mark the pos side and when finished attaching wires and attempting to start the car-no go. Someone help with the wiring of the coil?
thanks,
Mitch

 

[67Dart273]

Positive normally has a condenser (capacitor) for radio noise suppression and one other wire which comes from the ballast resistor.

Neg side goes to distributor if you still run a points dist. and the tach wire if you have one.