WIW six pack air cleaner

[coloradohill]

I have a six pack air cleaner that I’m trying to identify/find a fair selling price.

I have struck out looking online for a similar one. I’m thinking it may have been fabricated. The only markings I see is a “R” near one of the holes in the lid.

I believe it is aluminum as it’s non magnetic. Approximately 1/4 thick lid and lower.

Any help/opinions are appreciated.

TIA

 

[missing linc]

Looks like it could well be a custom fabricated piece, anyone's guess what it would be worth.

 

[killerslant]

Nice looking piece. Height will kill the value for most if they don't have scooped hood. If I saw it at a swap meet in the $200.00 range I would keep an eye on it until pack up time and make an offer.

 

[33IMP]

Not stock Chevy or Mopar. Looks like custom made to use that K&N filter. Not a stock size Mopar filter either.. Good for someone using a Sixpack in a non-stock application. I'd try to find out if it fits corvette carb spacing too.
Looks like a very nicely made part. $150-$200 to the right buyer.

 

[coloradohill]

Thanks for the replies. I’ll post some measurements when I have a chance.

 

[33IMP]

I looked to see if I could find the carb mount spacing of the corvette tripower, but I couldn't find that info.
I have a edelbrock Sixpack for a 440 I could measure, but it's 200 miles away.
I suspect that the corvette and Mopar are the same, they both used vacuum secondary carbs.
Ford tripower spacing might be different, they used mechanical secondary carbs

 

[coloradohill]

I have both vacuum and mechanical setups and the spacing is the same.
Thanks again

 

[coloradohill]

If anyone is curious, the dimensions of this air cleaner are.

Approximately 21.5x 10.5x 4”