rigger3006
Well-Known Member
stock 727 low stall torque converter i was about to use, decided to drain it, was almost completely full of water, should i turf it or is there any hope?. guess im stuck with hughes 3000 for now.
worth repairing or using again
- Thread starter rigger3006
- Start date
-
stroked340
Well-Known Member
rigger3006
Well-Known Member
kind of what i figured, good excuse for a custom!
transman
Well-Known Member
I hope your transmission isn't full of water too!
There's always hope. Yours' can be rebuilt in B.C. by a long established converter rebuilding company in Langley. They probably have a rebuilt unit on the shelf. It's interesting that you've got a low stall stock unit and are going to replace it with a 3000 stall.
Is the 3000 stall matched to your engine-drivetrain combination or not.
Just wondering.
There's always hope. Yours' can be rebuilt in B.C. by a long established converter rebuilding company in Langley. They probably have a rebuilt unit on the shelf. It's interesting that you've got a low stall stock unit and are going to replace it with a 3000 stall.
Is the 3000 stall matched to your engine-drivetrain combination or not.
Just wondering.
..................I'd just get another, not worth doing anything with a stock 1 when u can get a rebuilt for pocket change...........kim.........
-
