WTB: X or J Heads

[GTXperience]

I am looking fir a set of X or J heads. I would prefer that they are all ready set up for 2.02s but 1.88s are fine as well. I am looking for a set of untouched units or mildly cleaned up heads with minor bowl work, etc. If they have been ported/polished, it would be great if there are some real flow numbers and/or receipts that go along with them. I am located in NorCal and it would be great to find a set relatively close by but will consider all possibilities. Thanks in advance.

 

[DusterBoy15]

i know their not j or x heads bout the ones i have already have hardened exhaust seats and are complete only asking 80 but up to you

 

[GTXperience]

No, thank you.

 

[dgc333]

Why limit your self to X or J heads? All 340-360 open chamber heads (except 308s) have the same port and chamber size. The only difference will be the X heads will have 2.02 intakes and the rest have 1.88 intakes.

 

[GTXperience]

Why limit your self to X or J heads? All 340-360 open chamber heads (except 308s) have the same port and chamber size. The only difference will be the X heads will have 2.02 intakes and the rest have 1.88 intakes.

Dave, I was a little torn between a stock/correct looking motor with some internal mods made and one that I did not care if it had the correct heads or not for the year. Just to broaden the search, I will say that I am open to other 340-360 heads as well.

Merry Christmas!

 

[DusterBoy15]

just not the one with smog holes

 

[badlilred79]

i have a set of xheads with new valve springs to match up to a 5.09 lift cam mopar springsp5249847 3angle valve job with the last cut was back cut and unleaded seats and new guids in them ready to bolt on 475.00 plus shipping call for more stuff 931 261 8227 mopar or no car

 

[dgc333]

just not the one with smog holes

The smog holes don't change the port or chamber size or the ability to flow air. They just need to be plug when not being used.

 

[redfastback]

ben, check your pm's.

 

[DusterBoy15]

i was jsut saying becasue i had some for sale but he wasnt intrested thats all

 

[dan brooks]

dont know when you'll get this but There's a set of j heads on ebay right now for 107.00. Times up in two days. Item number is 110208658250. Let me know if this works for you. I have sets of both style heads but really don't want to part with them. Might think about it if the moneys right though, Dan.