New articles

I inadvertently found a way to remove the gold finish off a Milodon oil pan and I wanted to share. I recently bought a pan with a little bit of corrosion. So I decided to fill it with Evaporust, leave it on a radiator, and come back to it in a couple days. This is what it looked like after i...

OK I have been askked many times where to get a repop tag that is right. Unfortunately no one is stamping them and only one style of the four is available now. Some pics of real tags There is one more style I have to get a picture of. I looked into getting the other styles made up but cost...

Just looking for some inside on the correct removal procedure.There is a lot of info on a/c cars.Not so much on the non a/c blower motor.Any help appreciated.Thanks,Wayde

This one is not finished yet, I am still editing it... You are welcome to look at what I have so far, but keep in mind it is far from finished... Please check back later when it is finished... I will remove this text when it is done... Now we are going to install the alternator and pulleys...

Now we are going to install the valve covers and oil filter adapter... In the last chapter we installed the oil pan... This is the next step to continue after Sections 1 - 19... If you missed one of them, you can find it here... How to Rebuild a Small Block Part 1: Block Prep How to Rebuild...

Now we are going to install the valve covers and oil filter adapter... In the last chapter we installed the oil pan... This is the next step to continue after Sections 1 - 19... If you missed one of them, you can find it here... How to Rebuild a Small Block Part 1: Block Prep How to Rebuild...

If so I would like to hear your thoughts on redrilling the rotors (drum in hat 13") to 5 on 4 1/2 , also on measuring for new axles ? I'm pretty deep into this so looking for comments from only those who have done this .