Hello everyone, I am putting new clutch plates into my dif carrier. I bought a kit from mancini racing and I attached a link to the kit I bought just so y'all have a reference. When you click on the link and see the photo they provide, the left part of the picture shows the spacers with the teeth and the right part of the picture shows the clutches. I don't know if I am calling those right but we'll call them that for the sake of this. Regarding the left part of the pic showing the spacers, two of the spacers should be concave and two of them should be flat. At least, this is what a video or two have shown me when it comes to assembly. When I opened the package, I received four spacers and they were all flat. Does anyone know if this is right? Can I just add two of the flat spacers in place of the concave ones and assemble everything else correctly? The clutches were all correct; 2 thin flat ones, 2 thick flat ones, and 2 concave ones. Now that I'm thinking about it as I'm writing this, I can use the two curved spacers that came out of the carrier if I need to. They don't have too much wear. Any help is appreciated, thank you!
Mopar Power Loc Rear Differential Clutch Kit
Mopar Power Loc Rear Differential Clutch Kit