DionR's latest activity
-
Thanks all!! -
DionR replied to the thread 4 speed linkage.‘65 4 Speed Hump Install
-
DionR replied to the thread 4 speed linkage.Right, but when he puts the hump on, I bet it will look fine. At that point only the shifter will come through the floor.
-
DionR replied to the thread 4 speed linkage.Pretty sure my 1-2 and 3-4 shift rods go above the crossmember like that. I think he is just missing the 4 speed hump, makes it look...
-
DionR replied to the thread 4 speed linkage.Pretty sure the reverse lever is upside down.
-
DionR replied to the thread 1971 6.1 ProTouring HemiDuster.Really just interested in what radiator hoses you used. I only asked about the radiator to see if it was a match. It look similar and...
-
I'll try and find it, it's a Champion 26" for a B-Body with both the inlet and outlet on the passenger side.
-
Any members here going to the Monroe swap meet this weekend or will have vender spots? A buddy and I plan to be there unless something...
-
DionR replied to the thread 73 Duster build named Fred.Any history on the Daytona? There is a guy local to me that used to campaign a Daytona with Direction Connection colors.
-
DionR replied to the thread 360 vs 383.I think there are two scenarios for this topic. One is this is a swap with what can be found as an ok motor that should run and the...
-
DionR replied to the thread Magnum Heads On 340.Steel with a Magnum gasket on one side and an LA gasket on the other. They aren’t gaskets themselves.
-
DionR replied to the thread Gen3 hemi tkx swap.Please post pictures of the parts before welding as well as after. Dying of curiosity to see it. :thumbsup:
-
DionR replied to the thread Builders: Square engine, Over Square, or Under Square for you?.Interesting that the 5.7 and 6.4 G3 just about hits that ratio perfectly. Add that is has a 9.25 deck height, I think.
-
DionR replied to the thread 1971 6.1 ProTouring HemiDuster.Hey what radiator are you running? I started a thread and tagged you in it at the end asking for help on radiator hoses for a Cold Case...
-
DionR replied to the thread Magnum Heads On 340.Based on those pictures, I would say they do not have enough meat to seal a 340 exhaust manifold. I tried to find a picture of an early...
