Engine, Transmission & Drivetrain
-
Leak Down Procedure (Pic Heavy)
- seabee
- Updated
- 1 min read
- Views: 6K
- Reaction score: 1
Did a leak down test on the 273 today and took some pics on how I did it for the next guy that searches it. Please add any , corrections, advice... -
How To Recondition a Sure Grip Cone
- RustyRatRod
- 4 min read
- Views: 28K
- Reaction score: 23
This is a how to on reconditioning a cone style sure grip unit. This is not a boni-fide approved repair in any book or manual. I have done a LOT... -
"451 Manifesto"
- inkjunkie
- 14 min read
- Views: 9K
- Reaction score: 1
Inkjunkie: At least I think that is what it was called. It was an article written by Andy F. I believe. Was on the AREngineering site, but my... -
How to Install a Bolt In Sprag in a 727
- 72ScampTramp
- Updated
- 2 min read
- Views: 12K
- Reaction score: 2
This unit is a TCI 4 bolt unit. Since no instructions are provided with this. It really was simple. And for $75 a worth while upgrade. Tools... -
How To A-833 4 Speed Rebuild pics
- smartken22
- Updated
- 4 min read
- Views: 25K
- Reaction score: 9
I started rebuilding my tranny so I thought that I would post some pics of the process for those thinking about trying this on their own one... -
How To Remove/Install Clutch Pedal Spring With Pictures
- 67valiant 100
- Updated
- 1 min read
- Views: 13K
- Reaction score: 3
Here's a new and easier way to remove/install the spring on the clutch pedal. ......Note this only works with the pedal assembly out of the...