Mopar Stage VI Big Block Rocker Arm Seller at Indy or Any Ideas

[PROSTOCKTOM]

I am looking to buy a set of Mopar Stage VI rocker arms and a friend told me there is an older guy at Indy every year that has the OEM Blue in clear Ziplock bags. Does anyone know who this gentleman is?

At this point all I need is the 4 lefts and 4 right intake rockers. Really not interested in paying the big money for Harland Sharp, T&D, or Jessel for this engine since I am just using 452 iron heads that have been filled and the port moved over requiring the pushrods to need moved as well.

I appreciate any help finding him or any other ideas.

Thanks,
Tom

 

[Bighead440]

I am looking to buy a set of Mopar Stage VI rocker arms and a friend told me there is an older guy at Indy every year that has the OEM Blue in clear Ziplock bags. Does anyone know who this gentleman is?

At this point all I need is the 4 lefts and 4 right intake rockers. Really not interested in paying the big money for Harland Sharp, T&D, or Jessel for this engine since I am just using 452 iron heads that have been filled and the port moved over requiring the pushrods to need moved as well.

I appreciate any help finding him or any other ideas.

Thanks,
Tom

They take no special rocker, just standard .250" offset. If you mean Stage VI MAX WEDGE, then YES they take something like .450-.485" offset. I have some...

 

[PRH]

Actually, crane had some rockers they sold for Indy SR, B1-BS, and stage 4/5/6 that had slightly more offset for the intake rockers than their “std” rockers.
I don’t know if MP ever offered those though.
MP sold the .485” offset MW stage 6 intake rockers that were made by Crane, and Crane never offered those.

I have 2 new sets of those .485” offset intake rockers in a 1.5 ratio.

 

[Bighead440]

Actually, crane had some rockers they sold for Indy SR, B1-BS, and stage 4/5/6 that had slightly more offset for the intake rockers than their “std” rockers.
I don’t know if MP ever offered those though.
MP sold the .485” offset MW stage 6 intake rockers that were made by Crane, and Crane never offered those.


Yes, I think the Stage 4/5 ones were .450" and the St6 MW were .485". They do help on a Stage 6 regular, but the SR's and regular St6 were marketed as designed to "save you money" by using stock (.250") offset rockers. HAHAHA!! #savemoney

 

[PROSTOCKTOM]

That's the ones.

Tom

 

[PRH]

The ones Crane sold were hardly any more offset than the std rockers.
The intakes were .290.

The MW stage 6’s really needed the .485 offset.