Search results for query: *

  1. Jeremiah (jd)

    [SOLD] 1964 426 street wedge tach drive dual point distributor

    For sale 1964 RB/426 street wedge /1962 413 2x4 distributor (pn listed for both engines). I removed this distributor from a running 1964 426 Street Wedge. Pn 2444247 Asking $275 plus shipping.
  2. Jeremiah (jd)

    [SOLD] 625cfm Carter AFB pn 9636sa

    For sale Carter 625cfm carb for parts. This carburetor was running on a Ford 460. It was swapped out during troubleshooting and then someone borrowed the idle mixture screws. Other than that it is complete. I would rather have someone be able to use it then find a new home in the dumpster. Make...
  3. Jeremiah (jd)

    [SOLD] 1969-70 Holley 4160 600cfm vac sec 4740-2

    For sale 1969-70 Holley 4160 list # 4749-2. This carb specs to a late 69 early 70 350hp 440. This is a good rebuildable core for a street engine that you intend to look OEM. Asking $50 plus shipping
  4. Jeremiah (jd)

    [FOR SALE] Carter AFB pn 4131S 1966 383 440

    For sale 1966 Carter AFB 4131S. This carb specs out for a 1966 440 or 383 non CAP. It ran good on a rebuilt 400 bb. Asking $150
  5. Jeremiah (jd)

    [FOR SALE] Carter BBD 2 barrel core

    For sale Carter BBD core from a running engine. I saved this as a spare for about 10 years and no longer have a vehicle with this carburetor in our fleet. Asking $15 plus shipping No I do not have any other pictures of my thumb
  6. Jeremiah (jd)

    [FOR SALE] Holley 4160 Carb 4749-3 '70 383 440

    For sale late 1969 early 1970 Holley 4160 List 4749-3. This is a good rebuildable core. $50 plus shipping
  7. Jeremiah (jd)

    [FOR SALE] Çarter AFB 4310S 1967 383hp Auto

    This carb was on a running 400 bb. It was snappy! Asking $125 +shipping
  8. Jeremiah (jd)

    [SOLD] Carter Thermoquad 9810 800cfm non OEM

    Carter 9810 Thermoquad for sale. I removed this from a running 440. Asking $125 plus shipping. Unfortunately these carburetors will not fit in a flat rate shipping box.
  9. Jeremiah (jd)

    [SOLD] Carter AFB 3921S 65 Buick 425

    For sale Carter AFB 3921S rebuildable core. This carb pn specs out as a 1965 Buick 425 however I found it in a '69 Superbee on a 383. Asking $25 plus shipping Sorry for listing a GM part : /
  10. Jeremiah (jd)

    [FOR SALE] 1964 Carter AFB 3611S 1964 383/426 wedge

    For sale Carter 3611S AFB core. This carburetor is pretty rough. The throttle blades are stuck. It came off of a 426 street wedge that we were able to get runnind so I am confident this could be saved with soaking and some TLC. Asking $50 We can ahip AFB carbs for about $25 in a USPS flat...
  11. Jeremiah (jd)

    [SOLD] 1969 350hp 440 4 Barrel Distributor

    For sale p/n 2875758 distributor for a 1969 350hp 440. Points and condenser MIA. This is a great foundation for a Pertronix breakerless ignition conversion. $35
  12. Jeremiah (jd)

    [SOLD] MP 3690430 LA 318/360 Distributor

    For sale MP 3690430 LA 318/360 distributor. $50 plus shipping
  13. Jeremiah (jd)

    [FOR SALE] 1986 B250 LA 318 360 Distributor

    For sale on p/n 3755486 with the vac advance deleted. Asking $25 plus shipping
  14. Jeremiah (jd)

    [FOR SALE] Big Block Race Pumps Mechanical fuel pump + regulator

    For sale Race Pumps brand mechanical fuel pump and regulator. I bought this used/rebuilt and ran it for a few seasons on 110 leaded. * This pump must be used with a large micron pre filter and sumped tank/fuel cell. * My only reason for putting it on the shelf was swapping to in-tank pumps to...
  15. Jeremiah (jd)

    [FOR SALE] $20k 1967 A100 Truck 360 w B&M 177/727/8.75

    1967 A100 Truck -360 LA with a B&M 177 supercharger, Edelbrock carb, headers etc. -727 TF with aftermarket converter anf shift kit -3" exhaust with Magnaflow mufflers -15" Torque Thrust D wheels with good cooper Cobra tires. - Nice black interior needs carpet (not present) and speedo cable assy...
  16. Jeremiah (jd)

    Does a HD rear spring/shackle hanger exist for a 68 Dart?

    Hello, I am in the process of upgrdaing my 68 GTS to offset spring hangers, cal tracs and a j60-15 rear tire. Does anyone make a rear spring hanger that is more stout than the flimsy OEM part? I looked at the Mopar Performance replacements online and they dont look much better than stock...
  17. Jeremiah (jd)

    [WANTED] 5x4.5 bolt pattern axle drilled for 5/8" wheel studs

    I am looking for an axle that accepts 5/8 screw in wheel studs. One will do but I would buy a set if the price was right. I only need the flange of the axle for a jig to reinforce steel wheel centers. Thank you for looking!
  18. Jeremiah (jd)

    [SOLD] Quick Fuel 850/1000 cfm 1.75" bore 4150 base plate

    This 4150 base plate was on my Quick Fuel 1050AN 4150 style carb. It might have 5k miles on it. Never exposed to brake clean so the throttle shaft seals are tight. Stainless throttle blades, easy adjust secondary idle speed and convenient vacuum ports await you : D My reason for replacing it...
  19. Jeremiah (jd)

    [SOLD] QA1 1967-1976 tubular k member NIB $650 ($150 off summit price)

    I have a NIB QA1 tubular k member. These are set up for small block biscuit mounts for you will need a conversion kit if a big block is in your plan. I can provide intel as i have one in my '68 GTS 4 speed car with headers. I'd like $650 and I will absorb some of the shipping cost to male it...
  20. Jeremiah (jd)

    [FOR SALE] 440 Source 3/8" .065 push rods for 440/426/413 wedge with roller rockers

    (16) 440 source RB 3/8 x .065 wall push rods for cup adjuster. These fit well on an undecked 440 with PRW roller rockers. $125 shipped in the lower 48 Made in USA! https://store.440source.com/Pushrods-For-Adjustable-Rockers-_-RB-9180-long-Set-of-16/productinfo/105%2D1009/
  21. Jeremiah (jd)

    [FOR SALE] PQx BBM 1.5 Ratio Roller Rockers (PRW brand) with hold downs

    New set of PRW PQx 1.5 roller rockers and rocker shaft hold downs. These were mocked up on an engine but I ended up going 1.6 ratio. Never ran or heat cycled. There are no rocker shafts or bolts. $175 shipped in the lower 48 states. PRW states these are good up to 600psi spring pressures.
  22. Jeremiah (jd)

    [FOR SALE] 11x5" Reusable Race Air Filter (with aluminum lid and 4150 base)

    Washable, reusable 11x5" racing air filter from Randy's Racing Filters+. Does not require oil. Brand new, never bolted on. I paid $205, will ship in the lower 48 for $175. I was planning on using this on my 511" lowdeck with a max RPM 6500rpm. Any questions please ask. Very nice parts made...
  23. Jeremiah (jd)

    Can I upgrade my 68 Dart to a later style spool mount?

    Is the later spool-type transmission mount usable in my 68 Dart if I utilize the accompanying cross member? Thanks for any insight you might have!
  24. Jeremiah (jd)

    [WANTED] 14x4 or 14x5 SBP mag wheels

    Looking for some front runners for my GTS. Must be SBP in 14" Thanks for any leads!
  25. Jeremiah (jd)

    What are the best small block to big block conversion mounts?

    Howdy, I am considering switching over to a QA1 k member which will require LA to B motor conversion mounts. Any thoughts on which set to use? 440 Source, Mancini and others offer kits. Thank you for any insight!
  26. Jeremiah (jd)

    SSBC Aluminum Calipers Va. OEM 14" steel wheels?

    Howdy, In the interest of removing weight from the front of my GTS I am considering the following caliper upgrade: https://www.summitracing.com/parts/tsb-a199-1 Has anyone used these? The price is stiff so I am doing as much research as possible before pulling the trigger. Thanks for an...
  27. Jeremiah (jd)

    [Found!] 1968 Dart Hood Safety Catch and striker

    Howdy, I am in need of a safety catch and striker for my 68 Dart. Please shoot me a PM if you have something that will work. Thanks, jd
  28. Jeremiah (jd)

    [Found!] 1973-1976 A Body Center Link

    Howdy, I am looking for clean 73-76 a body center link in good usable condition. Please shoot me a PM if you can help.
  29. Jeremiah (jd)

    Need assistance with a shopping list to convert '68 GTS to 73-76 center link

    Howdy, One of my winter upgrades on the GTS is changing the center link to a 73-76 style for ease of maintenance (header/clutch removal). I currently have a 20:1 manual box in the car. Will the '68 steering box work with the later style pitman arm? In addition to finding a used 73-76 center...
  30. Jeremiah (jd)

    [FOR SALE] Hooker 5111HKR 1-3/4 Big Block Headers -new OOTB- $400

    I have a new OOTB set of Hooker 5111HKR headers. Hooker Headers 5111HKR Hooker Super Competition Headers | Summit Racing Summit wants $655 Buy these for $400 plus shipping from 97537 Rogue River, OR
Back
Top