Search results for query: *

  1. couper 340

    [WANTED] DRIVE SHAFT 46''

    let me re check it and see if i can get away with that i see three listing 45.60 that must be the one you have 45.79 and 45.85is yours the bigger 7290 joints and how much are you asking for it ? just checked mine looks like it may work will leave the yoke sticking out of the back of...
  2. couper 340

    [WANTED] DRIVE SHAFT 46''

    WANTED 46'' DRIVE SHAFT FOR DUSTER WITH 8 3/4 REAR AND 727 TRANS WOULD LIKE 7290 JOINTS 46 '' CENTER U JOINT TO CENTER U JOINT PM ME THANKS LIVE IN MARYLAND 21783
  3. couper 340

    727 dust shield

    Thanks to all that info .i was hopping that was the case didn't want to use the shield just in the way.
  4. couper 340

    727 dust shield

    If your racing at the track on teck insp do you have to have the lower dust shield cover on you 727 transmission or can you leave it off. MAYBE thinking to much but since the trans vent is on the front pump will the air rushing in to the bell housing cause the fluid to get forced out of the...
  5. couper 340

    [FOR SALE] CALTRACS # 4200 FOR DUSTER. DEMON , DART. SWINGER

    A set of Caltrac bars for a body # 4200 good shape some paint chipped off about 15 1/4 mile runs on them Come with all parts $310.00 PLUS shipping box is on heavy side send your zip code . I am in WESTEN Maryland 21783 if you want to pick up . P M me Can Delivered to Carlisle Friday the 12
  6. couper 340

    [FOR SALE] 7 1/4 REAR END DRUM TO DRUM

    1975 PLYMOUTH DUSTER 7 1/4 REAR END 2.76 GEAR IF I REMEMBER RIGHT DRUM TO DRUM $ 25.00 PICK UP IN WESTEN MARYLAND 21783 CHECK OIL DID NOT LOOK BAD AND TOWED THE CAR 3 HOURS TO MY HOME NO NOISE .
  7. couper 340

    [FOR SALE] Calvert Caltrac

    A set of Caltrac bars for a body # 4200 good shape some paint chips about 15 1/4 mile runs on them then sat on the car for 3 years. Come with all parts $320.00 most shipping is about $45 but send your zip code . I am in WESTEN Maryland if you want to pick up . P M me
  8. couper 340

    [SOLD] MR GASKET VERTIGATE SHIFTER 4 FOUR SPEED A BODY

    MR GASKET VERTIGATE SHIFTER 4 FOUR SPEED A BODY I have a Vertigate shifter that i bought years ago and never used or mounted it it is for A body and has surface rust on the black parts from sitting in my garage for years box rotted away has light scratches on chrome and very small chip in...
  9. couper 340

    Your first mopar...?

    First MOPAR i bought my wife couldn't have her driving a round in a vega any more . was a friend of mines car and he got a 1970 road runner. 1970 dodge challenger 318 slap stick 8 3/4
  10. couper 340

    Your first mopar...?

    My first Mopar 1971 DUSTER 340 4 SPEED 3.91 POSI I bought it in 1976 it had a 318 because the guy before me blow it up i found a 1971 cuda in a junk yard and bought the engine for $200.00 sold it in 1990 .
  11. couper 340

    Magnum head question

    I had 3 sets of magnum heads i bought over the years when i went to use them the machine shop told me there were all cracked and there were. Don't wast your time or money on used magnum heads you will burn your valve and seat
  12. couper 340

    Random pictures thread

    HAY What gas station was giving those out with a fill up ?
  13. couper 340

    [WANTED] Duster 1973 to 76 left rear tail light bezel

    OK THANK YOU Can use nice ones.
  14. couper 340

    [WANTED] Duster 1973 to 76 left rear tail light bezel

    you never heard of side ways math? it were you tell the woman half of your real age
  15. couper 340

    [WANTED] Duster 1973 to 76 left rear tail light bezel

    a little ruffer than i am looking for thanks
  16. couper 340

    [WANTED] Duster 1973 to 76 left rear tail light bezel

    yes drivers side thanks for looking
  17. couper 340

    [WANTED] Duster 1973 to 76 left rear tail light bezel

    Looking for left rear tail light bezel that still has chrome on it and no broken studs can have some pitting i no there 50 years old or older. send picture . Thank for looking . 74 DUSTER
  18. couper 340

    [WANTED] Wanted Mopar alternator

    I may have one i will look tomorrow
  19. couper 340

    [FOR SALE] 1975 225CU SLANT 6 PARTS & 7 1/4 REAR

    HERE are some parts i had removed from a 75 duster . if they don't sell there going to the scrap yard . see if there is some thing you can use. oil pan $ 15.00 plus shipping oil pump pick up $5.00 plus shipping...
  20. couper 340

    Info on '60s dealership Ridgewood auto sales "the home of Texas Dave" Queens NY

    COOL I didn't know that dealer was there.
  21. couper 340

    Info on '60s dealership Ridgewood auto sales "the home of Texas Dave" Queens NY

    Just remembered it was call S & W DODGE GO TO FLICKER AND THERE WILL BE PICTURES OF IT .
  22. couper 340

    Info on '60s dealership Ridgewood auto sales "the home of Texas Dave" Queens NY

    Hi i left queens N Y back in 1980 There was a dodge dealer there and i use to buy parts there but i don't think it was call ridge wood dodge.but could be wrong I think the plate you have came from a car lot that was about 1/8 mile down the road . let me do a little checking. It was on...
  23. couper 340

    Installed 1970 duster front bumper 0n my 1975 duster

    Had to remove all the rubber filler behind the bumper and sides to get it to fit back in . If you cut the front point off were my center of the bumper is hitting it would go right in some more . but is going to be a drag car but will be tagged . This was the blue car in my Avatar
  24. couper 340

    Installed 1970 duster front bumper 0n my 1975 duster

    yeah i should have done that already but always doing something else on the car first
  25. couper 340

    Installed 1970 duster front bumper 0n my 1975 duster

    didn't have to drill the frame the holes are all ready there just pass bolts up from the round hole that's already in the frame and there is a round hole in the front of frame rail
  26. couper 340

    Installed 1970 duster front bumper 0n my 1975 duster

    Installed 1970 duster front bumper and brackets 0n my 1975 duster went on with only one mod so far removed bumper shocks and put two 1/2 with 3/4 head bolts that came off the car cut the press on washers that were cracked and replace them with thick cat washers that i made flat on top and...
  27. couper 340

    [WANTED] 1970 Duster Bucket Seat ORIGINAL Upholstery

    When i did my 1970 they were all black my 1971 were black and charcoal got them from P G MOPAR very nice and were 3/4 the price of LEGENDARY this was in my 1970 had car 8 years before selling it.
Back
Top